When it comes to cleaning your home, bleach is your best friend.
If you can’t find it at a hardware store or home improvement store, you can buy it online.
But how do you spray your carpet?
That’s where bleach comes in handy.
According to an article by the National Academy of Sciences, the following steps will get you ready to make your own cleaning supplies with bleach.1.
First, get your bleach ready.
You can buy some at a Home Depot for $2.50 a gallon.
Then, you’ll need to make sure your bleach is labeled for use in home care.
If it’s not labeled for home care, make sure it has an expiration date on it, according to the academy.2.
Spray the carpet, but not all the way.
Make sure you spray all the carpet surfaces, but don’t completely wipe it off.
If the carpet is sticky, use the same kind of spray you spray to clean your carpet.3.
Apply the bleach to the surfaces you want to clean.
You may need to use more bleach than you think.
The academy recommends a 10- to 15-minute spray, depending on how wet your carpet is.
The spray can be applied in one big blob, or spread out.
You might also want to use a disposable sponge or tissue.4.
The carpet is going to be sticky, so wipe it down.
Once the carpet has been sprayed with bleach, it should be dry enough to use again.5.
The last step is to apply the bleach and clean your surfaces again.
If there are any dust particles on the carpet or floor, use a sponge to clean them off.6.
The bleach will actually make the carpet cleaner.
After cleaning the carpet surface, you may want to try a different brand of bleach to see how it works.
If you are planning on using bleach, be sure to buy some before you buy it.
It can be a bit expensive at the store.
The Academy recommends getting the products that are listed on the product packaging and don’t buy it at your local hardware store.
You should also be aware that home care supplies are very fragile and could break.
It’s best to take the time to thoroughly clean your home before you apply the product.